This board contains a relay, transformer, mini breaker, ground, and two pairs of low-voltage leads. The control module is 2.5″ (63.5 mm) high, measured from the metal frame to the top of the reset button.

Mount the board from inside the vacuum, through the mounting holes. The threaded reset button and low-voltage stems, secured with the included nuts, hold the board in place.

Click the photo and print it for wire placement instructions.

NOTE: Quarter-inch (6.3 mm) female spade terminals are not included. The 2.75″ (69.9 mm) dimension in the photo is measured from the outer edges of the reset button and the low-voltage connection stem. These two round structures are 2-1/8″ (54 mm) apart, center to center.

Circuitboard – 240V – 12Amp

Logowanie